Please select a business area and your country and language.
24 août 2020
Thanks to its relatively low cost and robust composition, steel continues to rival alternative materials in applications where cost-efficiency is more important than achieving the lowest possible weight. However, with a density of 7.85 g/cm3, it presents metalworkers with several challenges when it comes to grinding and drilling. Here we look at three common problems experienced when working with steel and steel alloys and share tips to overcome them.
One of the main challenges when working with steel and steel alloys is that material removal tasks can be very slow to perform, which quickly translates to reduced efficiency and higher costs. The material is very tough, which is one of its key benefits but slows down the material removal process.
Before starting the job, compare different material removal methods to ensure that the one you choose is the most efficient. For example, in some cases, cutting tools can produce results noticeably quicker, improving productivity. If grinding is the most appropriate method, choose the abrasive carefully. Hard-wearing abrasives, such as zirconium oxide, can improve the material removal rate, delivering excellent performance over a longer lifetime.
Despite its many benefits, steel is inherently prone to corrosion, and it can be difficult to try to protect it from rust. Achieving and maintaining a good surface finish for painting can also be a challenge.
Our tip: Avoiding cross-contamination between different materials, such as galvanized carbon steel and stainless steel, is crucial for minimizing corrosion. In practice, it means that you should never use the same angle grinder disk on two different materials. Additionally, if different materials are present where the work is taking place, remember to cover them to make sure they don't come into contact with splatter from the angle grinder. These steps will help reduce the risk of rust, helping you achieve the best possible surface finish for painting.
Thanks to its durability, steel is often used in the most challenging applications. However, the tools used are often heavy, and, as mentioned above, removal work can take a long time. Some applications can put workers at risk of fatigue and injuries, and sometimes it can be difficult even to find skilled workers for the most demanding tasks.
Ensure your workers have access to the right tools and pay attention to any features that can help improve safety and productivity, such as the power to weight ratio. Focus on the ergonomics of the tool: will the worker be able to handle them over long periods? Some tools can weigh over 5 kilos, increasing the physical strain on the worker. It is also worth looking at additional features that can help minimize the factors that contribute to fatigue. Autobalancers, for example, help stabilize the tool and significantly reduce vibration, which makes the tool safer to use for hours at a time.
Did you know that steel, besides its durability, is UV-resistant and fully recyclable? With over 3,500 steel grades in use today, it's fascinating to note that over 75 percent of them have emerged in the last 20 years, and the development of new generations is ongoing.
23 janvier 2024
Meuleuses Travail des métaux Enlèvement de matière
Les meuleuses industrielles sont essentielles pour l'enlèvement de matière dans des industries allant de la fabrication métallique à la construction, en passant par la construction navale. Les meuleuses industrielles à utilisation intensive et à...
22 juin 2023
Syndrome des vibrations du système mains-bras (HAVS) Enlèvement de matière Energie Vibration Sécurité Meuleuses Dispositif d'auto-équilibrage Coin des experts Travail des métaux
Les outils électriques sont un élément clé de la productivité dans l'industrie du pétrole et du gaz et dans l'industrie métallurgique. Les travaux d'entretien et de production doivent être effectués efficacement, cependant, l'utilisation intensive...
22 juin 2023
Enlèvement de matière Entretien des outils Outils Meuleuses Réseau d'air Accessoires Coin des experts Travail des métaux
Votre outil cale ou ne fonctionne pas de la manière escomptée et vous vous demandez pourquoi votre meuleuse d'angle tourne trop lentement ou cesse de fonctionner ? Poursuivez votre lecture pour en savoir plus.
Download our white paper
Inscrivez-vous à notre liste de diffusion.
Nous aimons avoir de vos nouvelles ! N'hésitez pas à nous envoyer vos questions, commentaires ou suggestions de thèmes à aborder. Vos propositions sont grandement appréciées.
