Please select a business area and your country and language.
18 decembrie 2018
Are there any explosive gases, vapours, mists or dust areas in your workplace? If so, then you may need special equipment, designed specifically for use in potentially explosive atmospheres within offshore platforms, mines, petrochemical plants and other industrial working environments. Here we explore how these types of atmospheres can occur and why it’s important to consider ATEX and NEC certifications when buying new equipment.
As an operations manager you might be aware of potentially explosive atmospheres that can ignite under certain conditions. To ensure safe working environments, employers are obliged to classify them into zones and perform a risk assessment. By respecting these classifications, it is possible to identify the right type of tools that will perform safely in each zone.
ATEX stands for "ATmosphere EXplosible" and is the designation commonly given to the two European Directives regulating these atmospheres:
Did you know? In the UK, this directive is implemented by DSEAR (The Dangerous Substances and Explosive Atmospheres Regulations). ATEX applies only to countries in the EU. However, for regions like North America, similar workplace zone systems are specified according to the NEC (National Electric Code) and IEC (International Electrotechnical Commission).
The ATEX 137 directive provides employers with guidance on how to specify the different zones. This classification of areas is based on the frequency and duration of the occurrence of an explosive atmosphere, including gas, vapour and mist.
| Zone | Definition |
Zone 0 |
A place in which explosive gases are continuously present or for long periods of time or frequently. |
Zone 1 |
A place in which explosive gases occasionally appear. |
Zone 2 |
A place where there is normally no presence of dangerous gases, or only occurring for a short period of time. |
Zone |
Definition |
Zone 20 |
A place in which combustible dust are present continuously, or for long period of time or frequently. |
Zone 21 |
A place in which explosive dust clouds occurs occasionally under normal activity |
Zone 22 |
A place in which explosive dust is not likely to occur or only occurring for short periods. |
ATEX is here to help you choose the right equipment to ensure your operators’ safety in explosive atmospheres.
Disclaimer: This article is neither a magnum opus control exposure to explosive atmospheres nor legal advice for your company to use in complying with your local regulations. Instead, it provides background information to help you better understand how to address some important points. This information is not the same as legal advice, where an attorney applies the law to your specific circumstances, so we insist that you consult an attorney if you’d like advice on your interpretation of this information or its accuracy. In a nutshell, you may not rely on this paper as legal advice, nor as a recommendation of any particular legal understanding.
24 august 2020
Impact Wrenches Tools Safety Metalworking Expert Corner
Thanks to its relatively low cost and robust composition, steel continues to rival alternative materials in applications where cost-efficiency is more important than achieving the lowest possible weight. However, with a density of 7.85 g/cm3, it...
05 mai 2020
Grinders Safety Expert Corner Metalworking
Minimizing the risk of accidents in the workplace is a top priority in industry, and it is especially important when working with pneumatic power tools. Ensuring that all safety precautions have been taken to protect the health and wellbeing of...
28 octombrie 2019
Tools Safety Accessories Expert Corner
You may have great fall protection measures in place to keep employees safe when working at height, but what about their co-workers below? Dropped tools and other falling objects are a major hazard – and one that isn’t always fully addressed. The...
