Please select a business area and your country and language.
Chicago Pneumatic supports you throughout all your metal welding processes, from surface preparation to weld seam removal and finishing. Our range of angle, vertical and die grinders, angle and belt sanders is designed to optimize your metalworking applications.
Consistent speed and power are critical to achieving efficient material removal throughout the welding process. As a specialist in metalworking, Chicago Pneumatic offers you a versatile range of air tools especially designed to help you in surface preparation and cleaning. Chicago Pneumatic supports welders by providing multiple tool designs to reach narrow spaces and multiple speed options based on application requirements.
Skvelý výkon pri podmienkach vysoko náročného používnia
Pásová brúska kompaktnej veľkosti
| Vertical grinders | Angle grinders | Angle sanders | Belt sanders | Die grinders | |||||||
| CP3349 | CP3550 | CP3650 | CP3850 | CP3550 | CP3550 (low speed) |
CP3650 | CP3850 | CP5080 | CP3550 | CP3119 | |
| Power (Hp/W) | 4.0 hp / 3000 W |
1.5 hp / 1100 W |
2.4 hp / 1800 W |
2.8 hp / 2100 W |
1.5 hp / 1100 W |
1.5 hp / 1100 W |
2.4 hp / 1800 W |
2.8 hp / 2100 W |
0.5 hp / 400 W |
1.5 hp / 1100 W |
1.2 hp / 900 W |
| Abrasives |
|
|
|
|
Sanding pad |
Sanding pad |
Sanding pad |
Sanding pad |
Sanding belt |
Mounted top |
Mounted top |
| Abrasive size | 7" - 9" / 180 mm - 230 mm |
4" - 6" / 100 mm - 150 mm |
4” - 7” / 100 mm - 180 mm |
7" - 9" / 180 mm - 230 mm |
5" - 7" / 125 mm - 180 mm |
5" - 9" / 125 mm - 230 mm |
4” - 7” / 100 mm - 180 mm |
7" - 9" / 180 mm - 230 mm |
1/2x18" - 1x18 / 13x457 mm - 25x457 mm |
NA | NA |
| Applications in welding | Surface preparation |
|
|
|
|
|
|
|
|
|
|
| Special features | Shut-off mechanism | Rotative guard |
|
Rotative guard | / | / | Optional silencer | Spindle lock for easy change of abrasive |
|||
| Anti-vibration option (autobalancer) | Yes | No | Yes | Optional (not for ANSI market) | No | No | No | Optional (not for ANSI market) | No | No | No |
Did you know? Up to 1/3 of welders and fitters’ activity consists of grinding weld seams. This is an important information to consider when choosing your tool.
Stainless steel and aluminum have a lower heat conductivity than steel and overheat more readily. To avoid overheating and melting the metal onto the abrasive, don’t push on the tool too hard and ensure you use the right abrasive for the job.
Utorok, 2020, mája 5
Grinders Safety Expert Corner Metalworking
Minimizing the risk of accidents in the workplace is a top priority in industry, and it is especially important when working with pneumatic power tools. Ensuring that all safety precautions have been taken to protect the health and wellbeing of...
Welding is a very important stage of fabrication. However, for any welding process to be efficient and accurate the material must be prepared properly so that it is in the best possible condition for the next step. This can be achieved by effectively removing coatings such as paint, oils, greases, and rust (oxides).
It is crucial to remove impurities such as rust and mill scale when working with carbon steels. However, when working with stainless steels, it is often important to remove chromium oxide if a shiny decorative finish is required.
Nonferrous materials present their own challenges in the weld preparation process. For example, oxidation can take place very quickly on metals such as aluminum and titanium, and so there is a short time frame between surface cleaning and welding. If large areas are cleaned too early this often results in needing to rework the piece.
