Please select a business area and your country and language.
August 26, 2019
Have you found that your pneumatic tool is underpowered or not running as expected? Well, it could all come down to your air line accessories and/or connection, rather than the tool itself. It’s worth quickly checking your air line installation – a simple job that only takes a couple of minutes.
It’s easy: each accessory from the filter, regulator and lubricator (FRL) to the tool’s inlet should be selected considering the following four key tool values:
= type of thread on the tool air inlet. The three main types of pneumatic tool inlet threads are:
Safety tip: To avoid any wrong connections or air leakage, never mix thread types.
Refer to the manufacturer’s recommendations online, to the tool print catalog or the operating manual.
4 key tool values to consider when selecting air line accessories
By double-checking these four values, you will not only increase your tool’s efficiency but also reduce safety hazards in the workplace linked to air line installation failure. Enhance your installation safety by reading our air line installation guide and self-diagnostic check list.
Want to improve efficiency while ensuring safety? Double-check your compressed air line accessories first.
Download our free technical guide
June 22, 2023
Material removal Tools Maintenance Tools Grinders Air line Accessories Expert Corner Metalworking
Your tool is stalling, or is not working to its expected performance, and you find yourself asking ‘why is my angle grinder spinning too slowly?’, or ‘why has my pneumatic grinder stopped working?’, read on.
July 27, 2020
Tools Safety Grinders Metalworking Accessories Autobalancer Expert Corner
The tool used can play a significant role in the success of a metalworking task. That is why managers should pay careful attention when specifying pneumatic tools to ensure they contribute to the efficiency, productivity, and...
October 28, 2019
Tools Safety Accessories Expert Corner
You may have great fall protection measures in place to keep employees safe when working at height, but what about their co-workers below? Dropped tools and other falling objects are a major hazard – and one that isn’t always fully addressed. The...
Join our mailing list
We love hearing from you! Please send us your questions, feedback or topic suggestions. Your submissions are greatly appreciated.
