Votre navigateur n'est pas pris en charge

Nous ne prenons plus en charge le navigateur que vous utilisez. Pour continuer à consulter notre site web, veuillez utiliser l'un des navigateurs pris en charge suivants.

Our global presence

Please select a business area and your country and language.

Close

Pas certain de ce que vous cherchez ?

Utilisez les raccourcis ci-dessous

Do You Know The Two Different Types of Pneumatic Torque Wrenches?

31 août 2017

When it comes to precision bolting tools, there are two types of pneumatic torque wrenches that get the job done; shut-off nutrunners and stall torque nutrunners. But what's the difference?

  • A shut-off nutrunner is a reliable tool that can deliver different torque (depending on the model) with a constant air pressure (90 PSI / 6.3 Bars) – based on what you need for your application.

shut-off nurtunner

As the name suggests, once the set-up torque is reached, the tool shuts itself off. A clear shut-off signal tells the operator when the tightening cycle is complete, therefore, you get the same accurate result regardless of the operator and their level of experience. Not only does this ensure accuracy, but it also boosts productivity because the operator can immediately move on to the next bolt without having to spend too much time on checking.

  • A stall torque nutrunner is also a continuous rotation tool, but unlike the shut-off, the torque delivered by these tools varies depending on the air pressure.

Stall Torque Nutrunner

Stall torque describes the torque produced by a mechanical device with output rotational speed equal to zero. The torque load could also cause the output rotational speed of a device to become zero, meaning it caused stalling. Stall torque nutrunners are very strong, compact and lightweight tools, ideal for maintenance precision bolting. To obtain the right tool's torque, the operator should set up the appropriate air pressure (all information is provided by the manufacturer in the tool's torque chart, available on the tool test certificate. The air pressure level can go from 21.7 PSI (1.5 Bars) to 90 PSI (6.3 Bars).)

This set-up allows the tool to be versatile, and offers a wide range of torque, which can go up to 7375.6 ft.lbs (10000 Nm); however, any kind of air pressure variations will modify the final torque applied. Therefore, in order to ensure that the set-up torque is reached, a check is recommended. 

Christophe Roland

Before making a choice, make sure you identify the torque you need, and the frequency and conditions of use. For example, on applications such as wheel changing on heavy trucks or buses, the frequency of use is high, and therefore a shut-off nutrunner may be best. Contrarily, for flange assembly in the oil & gas industry, I would recommend a stall torque nutrunner, which will provide a higher torque range and better user comfort.

Christophe Roland , Very High Load Specialist at Chicago Pneumatic
Chicago Pneumatic Experts - what gives power to an impact wrench - how does a pneumatic grinder work

Nos experts vous en disent plus

Restez connectés et recevez tous les articles de nos experts

Abonnez-vous à notre newsletter

Loading...